E Glass Woven Roving for Hand Lay-up and Panel Production

Woven roving is a heavy plain-weave fabric made from direct roving, usually in weights from 200 to 800 g/m2. Compared with chopped strand mat it gives much higher strength per unit weight, so the two are normally used together: mat for the surface layer and bulk build, woven roving for structural strength. It drapes reasonably well and is the workhorse reinforcement for open moulding.

Quality differences between suppliers show up in thickness consistency, loom state cleanliness, wet-out speed and the amount of broken filaments. Even thickness keeps resin-to-glass ratio predictable and avoids dry spots in thick laminates.

Typical specification range

PropertyRange
Areal weight200 - 800 g/m2
WeavePlain
Roll width1000 - 2000 mm
Compatible resinsUP, VE, epoxy
Roll length50 - 100 m
SizingSilane

Common weights

  • 200 - 300 g/m2 - light laminates, surface reinforcement
  • 400 - 500 g/m2 - general purpose lay-up
  • 600 - 800 g/m2 - thick structural laminates, fast build

Where it is used

Boat hulls and decks, storage tanks, truck bodies, cooling towers, pipes, GRP panels, chemical equipment linings and large moulded parts.

Related products: woven roving technical data, chopped strand mat, 7628 electronic grade fabrics.

Tell us the laminate thickness and resin system, and we will suggest the weight and lay-up sequence.