E Glass Direct Roving for Pultrusion, Winding and Weaving

Direct roving is wound directly from a single bushing, so every bobbin holds a continuous strand with consistent tex and uniform tension. That structure makes it the base reinforcement for pultrusion, filament winding, weaving, SMC and spray-up. Our E glass direct roving is coated with a silane-based sizing that wets out quickly in unsaturated polyester, vinyl ester and epoxy systems.

Choosing the right grade is mostly a question of matching tex, sizing compatibility and package format to your process. Fine tex suits weaving and multi-end applications; heavy tex suits pultrusion and winding where low catenary and high line speed matter. For epoxy systems, a dedicated epoxy-compatible sizing gives noticeably better interlaminar shear strength.

Typical specification range

PropertyRange
Linear density (tex)300 - 4800
Filament diameter13 - 24 um
SizingSilane, polyester / vinyl ester / epoxy compatible
Moisture content<= 0.1 %
Loss on ignition0.4 - 0.8 %
Package weight15 - 20 kg

Grades by process

  • Pultrusion roving - low fuzz, high tensile, fast line speed
  • Filament winding roving - uniform tension, minimal catenary
  • Spray-up roving - clean chopping, good dispersion
  • SMC roving - fast wet-out, good flow in the mould
  • Weaving roving - fine tex for woven fabrics

Where it is used

FRP profiles and rods, chemical storage tanks, CNG cylinders, pipes, boat hulls, wind blade components, automotive panels and electrical insulation.

Related products: direct roving technical data, pultrusion roving, winding roving, spray-up roving, SMC roving.

Send us the process, resin type and target tex, and we will match the sizing and package to your line.