Chopped strand mat is a non-woven reinforcement made from randomly oriented chopped glass strands, held together by a binder. It is the most widely used reinforcement for open moulding because it builds thickness quickly, conforms to complex shapes and wets out fast with polyester, vinyl ester and epoxy resins. Our CSM is produced on 3200 mm and 2600 mm lines with powder or emulsion binder, in weights from 100 g/m2 to 900 g/m2.
For buyers comparing suppliers, the parameters that matter most are weight tolerance, binder type, wet-out speed and the amount of fines. Tight weight control keeps laminate resin content predictable; an emulsion binder gives better drape for deep moulds, while a powder binder dissolves faster and suits RTM and continuous lamination.
| Property | Range |
|---|---|
| Areal weight | 100 - 900 g/m2 |
| Roll width | 1000 - 3200 mm |
| Binder | Powder or emulsion |
| Chopped strand length | 50 mm (standard) |
| Moisture content | <= 0.2 % |
| Compatible resins | UP, VE, epoxy |
Marine hulls and decks, chemical storage tanks, vehicle body panels, bathtubs and sanitary ware, cooling towers, ducting, and general FRP fabrication. It is also the standard surfacing layer behind a gel coat.
Related products: Chopped Strand Mat technical data, CSM for machine processing, CSM for hand lay-up, roving for CSM production.
Tell us the laminate thickness, resin system and moulding method, and we will recommend the right weight and binder type. Samples and technical data sheets are available on request.