AR Glass Fiber Mesh for External Wall Insulation

AR mesh is an open woven fabric made from alkali resistant glass yarn, coated to protect the strands during handling and to bond with the mortar. It is the standard reinforcement layer in external thermal insulation composite systems (ETICS), where it sits in the base coat over the insulation board and absorbs the tensile stresses that would otherwise crack the render.

Performance is judged by tensile strength per 50 mm, elongation, mesh size and the stability of the coating after wet cycling. A loose or inconsistent weave shows up as wavy render and as low pull-through resistance.

Typical specification range

PropertyRange
Mesh size4 x 4 to 10 x 10 mm
Areal weight60 - 160 g/m2
Tensile strength (warp)up to 1200 N / 50 mm depending on weight
Roll size1 x 50 m and 1 x 100 m
Coatingacrylic or styrene butadiene
Alkali resistanceAR glass with ZrO2

Where it is used

External wall insulation systems, render and plaster reinforcement, crack bridging on masonry, waterproofing membranes, and marble or tile back-buttering.

Related products: AR glass overview, AR roving, AR chopped strand.

Tell us the system thickness and required strength and we will match mesh size and weight.