CYS-E-CSMT Chopped Strand Mat
CYS-E-CSMT Chopped Strand Mat for Transparent Panel is made from Transparent E-glass chopped strands around 50mm in length, bonded together by powder or emulsion binder which is extremely soluble in styrene. The basic strand has a sizing system containing a silane coupling agent and specially designed with transparent property which gives the following products excellent performance in transparency.
The basic strands and the nature of the binder make E-CSMT suitable for hand lay-up, pultrusion, laminating compression molding, process, etc. Ideal for applications such as
transparent panels, tiles, parts.
![panel mat](http://www.169chem.net/uploadfile/20130617/20130617134710576.jpg)
![panel mat](http://www.169chem.net/uploadfile/20130617/20130617134801194.jpg)
Product Features
Good transparent
Excellent impregnation properties
Excellent conformability
Good mechanical properties
Good drapability
High tensile strength
Type of Glass |
E |
Unit weight (g/m2) |
100~900 |
Width(mm) |
200~3200 |
Binder |
Powder, Emulsion |
Technical Parameters
Unit weight |
Width |
Moisture content |
LOI |
<10% |
±5mm |
≤0.2% |
2~4% |
Packaging
Chopped Strand Mat is wound onto a paper tube which has an inside diameter of 80mm. The roll outside diameter is approximately 275mm. Each roll is wrapped up in plastic film and then packed in a carton. The rolls are stacked horizontally or vertically onto pallets. All pallets are stretch wrapped and strapped to maintain stability during transport.
Package height(mm) |
Width+50 |
Package inside diameter (mm) |
80 |
Package outside diameter(mm) |
275 |
Package weight(kg) |
20.8 |
Palletlength (mm) |
1140 |
1400 |
Pallet width (mm) |
1140 |
1140 |
Pallet height (mm) |
Width+50 |
Width+50 |
![](http://www.169chem.net/uploadfile/20130617/20130617134855765.jpg)
StorageChopped strand mat should be stored in its original packaging in a dry, cool and water-proof place. The recommended conditions are at temperatures from 15 to 35°C and humidity between 35 and 65%. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high, when the pallets are stacked in 2 or 3 layer, care should be taken to correctly and smoothly move the top pallet. |